Instructions
Printing Instructions1.Prepare your chosen image on the computer.
2.Prepare your printer.Print the image onto the MATT side of the transfer paper.
3. Leave the image to dry for about 10 minutes and then cut off the printed part.
Transfer Instructions (for heat press machines)
-Preheat the heat press machine and set the temperature at around 180℃
-Preheat the garment for a few seconds to remove wrinkles and moisture.
-Peel off the base paper from the transfer paper and put the image on the textile with the printed side facing up.
-Put the isolation paper on the image
-Heat for 15-30 seconds, then remove the textile from the machine after cooling down.
-Heat your iron (empty water) to maximum cotton setting for 3 minutes;
-Lay fabric on a hard, smooth surface.
-Peel off the base paper from the transfer paper, and place the image on the fabric with printed side facing up.
-Place a piece of isolation paper over the image.
-Place the heated iron on the isolation paper slightly for no more than 15 seconds to fix the image onto the fabric.
- Iron for a further 60 seconds (maximum) evenly with slow circling movements from edge to edge ensuring heat is evenly transferred over the entire area.
-Peel isolation paper after cooling down.
Washing & Ironing
1.Wait 24 hours before washing for the first time.
2.Wash separately in cold water with garment turning inside out.
3.Turn garment inside out and avoid direct contact of the image with the iron.
Facebook:https://www.facebook.com/dyesubli
Twitter:https://twitter.com/dyesubli
Pinterest:https://www.pinterest.com/dyesubli/
website: www.feiyuepaper.com
www.skyimagepaper.com
http://heatsub.com/?spm=0.0.0.0.lquSox
E-mail: sales@feiyuepaper.com
dyesubli@gmail.com
没有评论:
发表评论