Do You Know How to Trick Epson Ink Cartridges

Epson printers are equipped with maintenance processes that count the number of pages for ink usage and alert the user when the ink cartridges are running low. Quickly, the printer will stop working until it gets a new cartridge.

However,in most cases, users notice that the printers can not calculate the ink level accurately and the printers always stop working even with at least 25% ink in the cartridge, forcing customers to discard the cartridge that can still be used and buy a new expensive replacement. The good news is, that we have worked out a solution to this problem--trick our printers.
You may be confused by the word “trick”. In fact, it’s quite simple, since all you have to do is lead the printer into thinking a new cartridge has been installed so the remaining ink can still be used.

Here I will introduce the solution in details.
1.Open up the Epson printer cover with the power on, then wait until the carriage has stopped sliding back and forth.
2.Remove all ink cartridges by squeezing the tabs on the short ends of each cartridge and lifting straight out.
3.Turn off the printer and wait for it to shut down completely.
4.Cut off the power of the printer and wait at least five minutes for the printer memory to reset.
5.Shake each cartridge for a few seconds to redistribute the ink inside.
6.Clean the nozzles in the printer housing underneath the cartridges with a swab that has been marinated in rubbing alcohol.
6.Wait for the alcohol to evaporate completely and then re-install the cartridges in the same order as each was removed.
7.Restore power to the Epson and print a page for test.




website:www.feiyuepaper.com
     www.skyimagepaper.com
E-mail:sales@feiyuepaper.com
    dyesubli@gmail.com
Twitter：https://twitter.com/dyesubli
Facebook：https://www.facebook.com/dyesubli
Pin：https://www.pinterest.com/dyesubli/