What Should We Pay Attention to When Use the Roll to Roll Heat Press Machine?

 

 In the process of the sublimation transfer or the heat transfer the most important material is the roll to roll heat press machine. It can help us transfer a variety to patterns onto many fabrics/textiles.Can also make the portrait, landscape and other patterns baked in porcelain plate, metal plate, especially for cultural shirt, making medals, 
commemorative card, tombstone like,
economical and practical.Then how much do you know about the roll to roll machine and what should you pay attention to when you use it ? Today I will show you the detail ans some tips of this machine in the following article.



  Features: The number of electronic display thermostat control temperature, accuracy (± 2 ℃), and there are fine-tuning knob heating wire and heating plate as a whole, safe, durable, heat distribution uniform heating plate peptide fluoride anti-stick coating electron Time control, process to complete the signal to indicate the pressure to adjust the floor installed arbitrarily high temperature foam silicone, temperature up to 400 ℃.

  Operation process Note: Roll to roll heat press machine must have a suitable and reliable protection of the ground. Plug the power supply, turn on the power switch, the power indicator will light up. The thermostat adjust to the required temperature, until the temperature reaches the set temperature, the upper part of the thermostat instructions off, then you can start working.The time controller will be adjusted to the required time. Transfer items placed on the next hot plate, and then put on the hot paper (note the front and back of the heat transfer paper), the handle force down to the end.

  Note: Do not exceed 30 kg, otherwise it may cause deformation of the handle.When the time of the controller is indicated, the buzzer will sound up and the handle will be lifted up to the original position. If it is a cold-tearing heat transfer paper, please use a blackboard to wipe the ironing paper again, wait 5 to 10 After the second, and then tear the tear to tear. If it is hot-torn Tang Hua paper, hot stamping finished immediately torn off the heat paper. Successful hot stamping need to have the right time, temperature and pressure with each other, clothing The thickness and the type of material and heat transfer paper all affect the effect of hot stamping. Please ask your hot paper suppliers to check the hot stamping information.

  These all above is my share and introduction about the roll to roll heat press machine. If you have any other needs or questions welcome to contact us at any time. We will provide you with the best quality products.Hope this article can be useful to you. Thank you for your reading.


Whatsapp:+8618752006819
Email:zeo@feiyuepaper.com

Do You Have A Heat Transfer Machine ?--------Pay Attention to The Following Tips When You Use!

  Hi, Thank you for your click with my blog! I have introduced you about a variety sublimation printing and transferring materials . And in the most article I introduced about the sublimation paper, sublimation ink and the inkjet digital printer. But you should know that finish a sublimation printing and the sublimation transferring completely the heat press machine is also necessary. Only with this machine you can transfer your patterns from the paper to your textile at the last step.And do you know what you should pay attention to when you use it ? Come on and read it , then you can transfer your patterns better and vividly.
  Roll to roll heat press machine can not only heat a variety of patterns in cotton, linen, chemical fiber and other fabrics, but also for screen printing, mortar, foam and other heat treatment process. Can also make the  portrait, landscape and other patterns baked in porcelain plate, metal plate, especially for cultural shirt, making medals, commemorative card, tombstone like, economical and practical.

   Features: The number of electronic display thermostat control temperature, accuracy (± 2 ℃), and there are fine-tuning knob heating wire and heating plate as a whole, safe, durable, heat distribution uniform heating plate peptide fluoride anti-stick coating electron Time control, process to complete the signal to indicate the pressure to adjust the floor installed arbitrarily high temperature foam silicone, temperature up to 400 ℃.
  Operation process Note: Roll to roll heat press machine must have a suitable and reliable protection of the ground. Plug the power supply, turn on the power switch, the power indicator will light up. The thermostat adjust to the required temperature, until the temperature reaches the set temperature, the upper part of the thermostat instructions off, then you can start working.The time controller will be adjusted to the required time. Transfer items placed on the next hot plate, and then put on the hot paper (note the front and back of the heat transfer paper), the handle force down to the end.

  Note: Do not exceed 30 kg, otherwise it may cause deformation of the handle. When the time of the controller is indicated, the buzzer will sound up and the handle will be lifted up to the original position. If it is a cold-tearing heat transfer paper, please use a blackboard to wipe the ironing paper again, wait 5 to 10 After the second, and then tear the tear to tear. If it is hot-torn Skyimage paper, hot stamping finished immediately torn off the heat paper. Successful hot stamping need to have the right time, temperature and pressure with each other, clothing The thickness and the type of material and heat transfer paper all affect the effect of hot stamping. Please ask your hot paper suppliers to check the hot stamping information.
  Okay, These all above is my suggestion about the tips when you use the heat press machine, hope it can be useful to you. Of course if you have any needs or questions welcome to contact us at any time.We will provide you with the best quality product
and service. Thank you for your reading.



Nanjing Feiyue paper Industrial Co.,ltd
www.heatsub.com
Skype：+8618752006819
Whatsapp：+8618752006819

Do You Know What is The Most Important for Heat Transfer Printing?

  Hi,Thank you for your click with my blog.You must know that all of my articles are about the sublimation transfer printing.What is the sublimation? A process of printing synthetic fabrics and other substrates using special, “subliming” dies which turn from a solid into a gas at a specified time, temperature and pressure. Under pressure these dyes in gas form are absorbed and encapsulated with pinpoint accuracy into the substrate. The gas returns to solid form once encapsulated. The result is a permanent print which will not wear off and is washable and with withstand dry-cleaning. And today I will share you the most import three elements when you doing a heat transfer printing.

  There are three integral specifications necessary to achieve optimal heat transfer printing - time, temperature and pressure. All are interrelated to each other during the process, i.e. more time - less temperature; more pressure - less time and vice versa. The relationships are not proportional, but do have an effect on the quality of the print.
1.Time
  The period in which the sublimation transfer paper and substrate is subjected to heat and pressure. On a continuous, rotary drum machine, this is a function of belt speed and the length of the heated area. On a platen style machine such as the Skyimage heat press machine, it is the time that the heads are closed on the machine. Twenty to thirty seconds is a typical range for traditional off-set, screen printed.
  The time variance is dependent on the dye formulation and the substrate to be printed. Forty to forty-five seconds is typical on ink jet printed sublimation paper. On all Skyimage roll to roll heat press machines, the time is automatically set with a dial on the control panel.
2. Pressure
  The process by which the sublimation paper and substrate is uniformly introduced to the heat source of the machine. Pressure requirements are relatively low (2 to 6 psi) but it is critical that the pressure is evenly distributed.
  The Skyimage rotary drum heat transfer machines, including model 7300IJ, apply pressure in a conventional, time-proven method of belt tension applied to the contoured heated surface of a heated drum. This requires a special high temperature belt that has characteristics allowing it to conform evenly and firmly to a curved surface.

3.Temperature
  Traditional sublimation inks used in the apparel and textile industries for the past 30 years have required temperatures in the range of 400°F. These printed products have to perform well in wash and dry-cleaning tests.
  The temperature must be maintained in the range of (+/-) 5° F, or there can be a shade differential in the print. The nature of the heat transfer printing process makes this a fairly complicated specification to control. Heat is constantly withdrawn from the heat source and must be replaced with a control standard of +/- 5° F. As a further complication, the heat is constantly moving toward the outside edges of the heat source with or without substrate withdrawal of heat. Astechnologies pioneered the multi-zone heat control system and was the first manufacturer to provide separate control of the heat across the width of the heated drum to achieve absolute security in temperature variance.
  Always use AIT temperature test strips to verify actual temperatures and calibrate your machinery.
  These above is my share about the elements of the heat transfer .Of course if you have some better suggestions or needs welcome to contact us at any time.We will provide you with the best quality product and the service. Hope this article can be useful to you. Thank you for your reading.




Nanjing Feiyue paper Industrial Co.,ltd
www.heatsub.com
Skype：+8618752006819
Whatsapp：+8618752006819