What Should We Pay Attention to When Use the Roll to Roll Heat Press Machine?

 

 In the process of the sublimation transfer or the heat transfer the most important material is the roll to roll heat press machine. It can help us transfer a variety to patterns onto many fabrics/textiles.Can also make the portrait, landscape and other patterns baked in porcelain plate, metal plate, especially for cultural shirt, making medals, 
commemorative card, tombstone like,
economical and practical.Then how much do you know about the roll to roll machine and what should you pay attention to when you use it ? Today I will show you the detail ans some tips of this machine in the following article.



  Features: The number of electronic display thermostat control temperature, accuracy (± 2 ℃), and there are fine-tuning knob heating wire and heating plate as a whole, safe, durable, heat distribution uniform heating plate peptide fluoride anti-stick coating electron Time control, process to complete the signal to indicate the pressure to adjust the floor installed arbitrarily high temperature foam silicone, temperature up to 400 ℃.

  Operation process Note: Roll to roll heat press machine must have a suitable and reliable protection of the ground. Plug the power supply, turn on the power switch, the power indicator will light up. The thermostat adjust to the required temperature, until the temperature reaches the set temperature, the upper part of the thermostat instructions off, then you can start working.The time controller will be adjusted to the required time. Transfer items placed on the next hot plate, and then put on the hot paper (note the front and back of the heat transfer paper), the handle force down to the end.

  Note: Do not exceed 30 kg, otherwise it may cause deformation of the handle.When the time of the controller is indicated, the buzzer will sound up and the handle will be lifted up to the original position. If it is a cold-tearing heat transfer paper, please use a blackboard to wipe the ironing paper again, wait 5 to 10 After the second, and then tear the tear to tear. If it is hot-torn Tang Hua paper, hot stamping finished immediately torn off the heat paper. Successful hot stamping need to have the right time, temperature and pressure with each other, clothing The thickness and the type of material and heat transfer paper all affect the effect of hot stamping. Please ask your hot paper suppliers to check the hot stamping information.

  These all above is my share and introduction about the roll to roll heat press machine. If you have any other needs or questions welcome to contact us at any time. We will provide you with the best quality products.Hope this article can be useful to you. Thank you for your reading.


Whatsapp:+8618752006819
Email:zeo@feiyuepaper.com