Hi, Nice to see you. Did you make your own DIY before? Have you tried about the sublimation printing and transferring technology for the mug DIY transfer? If you have tried about it you must have met many kind of different problems in your DIY transfer process. Then today I will share you some tips about how to solve the common problems in the mug sublimation printing.
1.The image appears blurry
If the image is blurry, there’s a chance you may be over-pressing the mug,meaning the sublimation ink is gassing out and spreading over more area than it should. You can also tell if you’re over-pressing the mug if the black colors appear brownish.
2.Pay attention to the time and temperature
If you find that you can’t print the mugs well, i think you should check the time and temperature at the first time.Most mug presses will require different times and temperatures for pressing mugs (and water bottles, steins, etc.).
3.The mugs turn to yellowish after printing
If you’re just getting yellow shading on the mug, there’s a good chance you’re actually using inkjet ink, not sublimation ink (which is required to sublimate onto mugs).
4.The black color turn to greenish
If the black colors in your image appear greenish after pressing, it usually means you’re under-pressing the mug.
5.Get the best color of your sublimation ink
Use an ICC profile or Power Driver when printing with sublimation inks in order to get the best color out of your sublimation ink.
6.The quality of the original image
The quality of the image on the mug may be poor because the actual image quality is poor. We suggest a DPI of 300 for sublimation printing.
These all above are my share about the common problems in your mug sublimation printing. If you have any need or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.
Whatsapp:+8618752006819
www.heatsub.com
Facebook: zeo(章江徽)
Email:zeo@feiyuepaper.com
没有评论:
发表评论