Do You Know How to Clean Your Print Head in A Right Way If it Blocked ?

  Hi, Glad to see you again. In the last article I have shared you that what aspects may blocked your print head. And in order to complete the problem s about the print head of the digital inkjet printer. Today I will also introduce you some ways about how to clean your print head if your print head is blocked.

  After the cause of the blockage can be cleaned up in accordance with the following steps: 
  
  A. ready to clean liquid and tool 

  B. the print head out, remove the inner box, unplug the power (do not shut down to unplug the power, so you can put off the printer ) 
  C. with one of the silicone tube into the print head of the small Zhu on the top pumping   
  D. and then take another hose suction 3-5ML cleaning fluid, forced into, pay attention to the two red frame in the cleaning fluid into the Do not spit out the cleaning fluid.
  E. over 15 minutes in the installation of no problem with the supply or cartridge problem to solve. 
  


  Note: the block can be a serious repeat can be repeated above the operation of this method to treat the same as the stripes effective hot bubble print head if the slight block, do not remove print head, the print head reversed up, in the print head array on the drop of 3-5 drops of cleaning fluid, 5-10 minutes after the suction pump with suction ink, test print. For the old jamming of the old jet nozzle, you can use the cleaning solution soak the print head part of 24 hours (to avoid soaking the circuit contact part), with suction pump suction suction, the machine test print.

  If your print head is the piezoelectric print head you can also try another way. Just like the way above.We all know that Piezoelectric print head is a long-life design of the print head, in addition, due to the print head manufacturing technology reasons, the nozzle aperture larger, no heating elements, generally not easy to plug. So if there is a more serious plug, you should consider immediately replace the ink, because this ink is simply unworthy called ink. The ink can be replaced, blocked the print head can try to use cleaning solution. If you can easily remove the print head, you can soak the print head down in the cleaning solution, do not soak the circuit board. Not more than 30 minutes, with a syringe to absorb 20 ml of cleaning fluid, toward the print head out of the direction of ink out. Finally, wash with pure water, install the test print head. Think about it, even the piezoelectric print head can clear pass! Of course, from the choice of ink, you should use a good product, the origin of the ink must be used with caution but also pay attention to the operation of the ink cleaning and sealing. In the actual print production, there may be a variety of other factors lead to disconnection, lack of color or even ink.

  These all above is my share about ways how to clean your print head. Of course if you have any other ways or the better suggestions welcome to contact us at any time and we promise to provide you with the best quality product and service. We are a professional sublimation printing and transferring material in China and we have 10 years experience in this industry. Waiting for your connection. Thank you for your reading.



Nanjing Feiyue paper Industrial Co.,ltd
www.heatsub.com
Skype：+8618752006819
Whatsapp：+8618752006819