Operations:
1, hand plug in the power, turn on the power switch, power indicator light then.
2, the thermostat adjusted to the required temperature, until the temperature reaches the set temperature, the upper part of the thermostat instructions exterminate, then you can start work.
3, Adjust the time controller to the desired time.
4,the clothing flat on the next hot plate, and then put on Tang Hua paper (note the positive side of Tang Hua paper), the handle downward pressure, until the end. Note: Do not force more than 30 kg, otherwise it may lead to deformation of the handle.
5, when the instructions hot stamping time controller time, the buzzer rang, the handle will be lifted to the in situation.
Notices:
1, the pressure: If the pressure is not enough or too large, adjustable heat press machine after the pressure knob to the clockwise direction that is to increase pressure; the other hand, reduce the pressure;
2, the time: when the hot stamping time to reach the buzzer does not ring or ring, if not appropriate, you must be adjusted to the appropriate location;
3, Temperature: When the temperature is reached, the thermostat pointer refers to the "180 ℃" position (about 5 minutes to reach), such as the thermometer rose when the heating plate does not heat, check the circuit.
4, when the handle down in the end, the hand release and the handle automatically pick-up, adjust the adjustment knob down.
5, when the hot stamping is completed, the handle up to mention the feeling of difficulty, you can adjust the adjustment knob down.
We are the manufacturer of sublimation transfer paper and ink in China.
Products: Fast dry sublimation paper, tacky/sticky sublimation paper, inkjet photo paper, sublimation ink, etc.
Our products mainly export to Asia, Europe and America.
Website: http://feiyuepaper.com
Email: dyesubli@gmail.com
没有评论:
发表评论